Find a Service Center
- Self-Centering Style
- SLD 1350 Type
- 140 mm Inside Diameter
- 190 mm Outside Diameter
description
- A Shaft Locking Device is made up of one inner ring and one outer ring, which are held together with socket head cap screws. These rings have an inclined plane built into them. Turning the screws brings the rings together, causing the rings to expand and fill the gap between the shaft and the hub. The pressure exerted by the expanded Shaft Locking Device on the hub I.D. and shaft O.D. creates grip, which allows it to hold the shaft and hub together without the need for a key, spline, or other traditional means of connection. The connection creates a very simple, yet effective, high torque mechanical interference fit that is easy to assemble and disassemble.
features
- Easy mounting and dismounting
- Zero backlash/mechanical interference fit
- Can transmit high torque
- Unaffected by shock loads, vibration, or reversing loads
- No fretting corrosion/no bonding of parts
- Infinite axial and radial adjustability
- Allows for precise positioning to eliminate axial preloading
- Eliminates keyways
caution
- Standard, QD-style HTD sprockets may not have the torque capacity for the higher rated HT150 belts.
| Style | Self-Centering |
| I.D. | 140 mm |
| Collar Width | 54 mm |
| Mountable Thickness | 1.339 in |
| Material | Silver/Metallic |
| Thickness | 2.126 in |
| Total Width @ Relaxed State | 68 mm |
| Set Screw Size | M14 |
| Torque | 136 in lb |
| Hub Bore Tolerance | 0.0028 in |
| Inch/Metric | Metric |
| Screw Material | Steel |
| Pressure on the Shaft | 21031 psi |
| Transmitted Torque (Max) | 16915 lb/ft |
| Screw Style | Socket Head Cap Screw |
| Locking Type | Internal Locking |
| O.D. | 190 mm |
| Screw Tightening Torque | 136 lb/ft |
| Pressure on the Hub | 20595 psi |
| Shaft Tolerance | -0.0025 in |
| No. of Screws | 9 |
| Contact Length | 34 mm |
| Transmitted Axial Force | 73654 lb/ft |
| Type | SLD 1350 |
| Weight | 9.921 LB |
| EAN or UPC | 697904983081 |
