Find a Service Center
- 2-Bolt Pillow Block
- Ball Bearing
- 2 7/16" Shaft
- 2 3/4" Base to Center
- Cast Iron
features
- Standard backing height
- Alignable
- Relubricatable
- Extended inner ring
- Corrosion-resistant powder coating
- Spring locking setscrew mount
| Center of Bearing to Front of Inner Ring | 1 5/16 in |
| Bolt Holes | 2 |
| Housing Width | 2 3/8 in |
| Overall Width | 2 3/8 in |
| Length Through Bore | 1 57/64 in |
| Bolt Size | 5/8 in |
| Seal Type | Contact Seals |
| Bolt Hole Spacing - Width | N/A |
| Housing Height | 5 3/8 in |
| Pillow Block Type | Thru-Bolt |
| Bolt Hole Spacing Range [Max] | 8 5/32 in |
| Base Length | 9 1/2 in |
| Bearing Type | Ball Bearing |
| Base Height | 1 7/64 in |
| Housing Construction | 1 Piece |
| Bearing Design | Non-Expansion |
| Housing Material | Cast Iron |
| Size Code | 212 |
| Mounted Unit Duty | Intermediate-Duty |
| Locking Device | Setscrew Locking Collar |
| End Type | Open End |
| Bolt Hole Spacing Range [Min] | 6 29/32 in |
| Base Width | 2 3/8 in |
| Inch/Metric | Inch |
| Center Line to Base Dimension [Min] | 2 3/4 in |
| Bolt Hole Length | 1 1/4 in |
| Lubrication | Relubricatable |
| Shaft Dia. | 2 7/16 in |
| Bearing Insert | SG239ELPA |
| Weight | 9.76 LB |
| EAN or UPC | 662864714419 |
