Find a Service Center
- Non-Expansion Ball Bearing Flange Pillow Block
- 2-Bolt Flange Type
- 3/4 in Shaft Diameter
- 3 9/16 in Housing Length
features
- High test iron housing
- Two-bolt (carriage) mounting
- Alignable
- Eccentric cam locking collar
- Extended and wide inner ring
| Housing Height | 2 3/8 in |
| Inch/Metric | Inch |
| Seal Type | Single Lip Contact Seals |
| Style | 2-Bolt Flange |
| Duty | Intermediate-Duty |
| Housing Construction | 1 Piece |
| Flange Thickness | 0.421875 in |
| Flange Type | 2-Bolt Flange |
| Length Through Bore | 1.21875 in |
| Locking Device | Eccentric Cam Locking Collar |
| Temperature Range [Min] | -20 °F |
| Dynamic Load Rating | 2870 lbf |
| Collar O.D. | 1 5/16 in |
| Lubrication | Relubricatable |
| Shaft Dia. | 0.75 in |
| Bearing Type | Ball Bearing |
| Overall Width | 1 11/32 in |
| Housing Width | 25/32 in |
| Temperature Range [Max] | 225 °F |
| Bolt Size | 5/16 in |
| Mounted Unit Duty | Intermediate-Duty |
| Series | 200 |
| Grease Fitting Size | 1/10-32 |
| Lubricant Type | Exxon Ronex MP |
| Bolt Circle Dia. | 2 13/16 in |
| Bolt Hole Spacing | 2 13/16 in |
| End Type | Open End |
| Set Screw Torque | 40 in lb |
| Housing Diameter | 2.0625 in |
| Bore Range [Min] | 0.5 in |
| Housing Length | 3 9/16 in |
| Bearing Design | Non-Expansion |
| Housing Material | High-Test Iron |
| RPM [Max] | 7500 rpm |
| Bore Range [Max] | 1.4375 in |
| Weight | 0.243 LB |
| EAN or UPC | 793699283082 |
