Find a Service Center
Alternate Products
- 0.63 in Inner Diameter
- 2.25 in Outer Diameter
- 1.31 in Overall Width
- Double Sealed Enclosure
features
- Lubrication holes and lubrication groove in bore of inner ring provide relubrication when cross-drilled bolt or shaft is used
| Self Aligning | No |
| Overall Width Tolerance [Max] | 1.3180 in |
| Rolling Element | Needle Roller |
| Operating Temperature [Max] | 230 ˚F |
| Material | Steel |
| Outer Ring Width | 1.25 in, 31.75 mm |
| Component | Assembly |
| Relubrication Feature | No |
| O.D. | 2.25 in, 57.15 mm |
| Clamping Dia. | 1.203 in |
| Working Load | 11100 lbf |
| Precision Class | P0 |
| No. of Rows | Single |
| I.D. | 5/8 in |
| Inner Ring Width | 1.31 in, 33.34 mm |
| Shaft Diameter - Slip Fit [Max] | 0.6247 in |
| Limiting Speed | 1500 rpm |
| Bearing Type | Needle Bearing |
| Enclosure | Sealed |
| Shaft Diameter - Press Fit [Min] | 0.6253 in |
| Series | YCR |
| Dynamic Capacity | 10600 lbf |
| O.D. Type | Straight |
| Overall Width Tolerance [Min] | 1.3030 in |
| Roller Dia. | 2 1/4 in |
| Shaft Diameter - Press Fit [Max] | 0.6257 in |
| Lubricant | Grease |
| Shaft Diameter - Slip Fit [Min] | 0.6243 in |
| Overall Width | 1 5/16 in |
| Inch/Metric | Inch |
| Bore Type | Round |
| Roller Type | Straight |
| Relubricatable | No |
| Inside Diameter Tolerance [Min] | 0.6246 in |
| Roller Width | 1 1/4 in |
| Operating Temperature [Min] | -22 ˚F |
| Speed (Max) Grease | 1700 rpm |
| Inside Diameter Tolerance [Max] | 0.6252 in |
| Weight | 1.34 LB |
| EAN or UPC | 605790189067 |
