RC-162110-FS

Single Row Steel Needle Roller Bearing

Item #101742861

Auto Replenish

each One-time purchase

Product Details

Transmits torque between the shaft and the housing in one direction, and allows free overrun in the opposite direction. The patented design utilizes the same low profile and radial section as drawn cup needle roller bearings. The units are compact, light in weight, and operate directly on a hardened shaft.

-FS" in the suffix for the RC and RCB call out stainless steel springs and are capable of higher operating temperatures and significantly higher engagements per minute
A polymer spring is standard for the RC and RCB
A stainless steel spring is standard for the FC, FCS, FCL, FCB and FCBL
A hardened and machined shaft or an "IR" Inner Ring is required for optimal performance
A press fit into the housing is required

Specifications

Speed (Max) Oil	8700 rpm
Bore Type	Round Bore, Inch Type
Radial Internal Clearance Specification	N/A
Bearing Material	1014 Steel
Cage Material	Nylon
Shaft Dia. [Min]	0.9995 in
O.D. Type	Straight
Shaft Dia. [Max]	1 in
Radial Internal Clearance	N/A
Oil Hole	w/o Oil Hole
Housing Shoulder Diameter	1.9 in
Lubricant	Rust Preventative
Component	Assembly
End Type	Open End
Mounting Method	Press Fit
Housing Bore [Min]	1.312 in
No. of Rows	1
I.D.	1 in
Operating Temperature [Max]	230 ˚F
Precision Class	ABEC 1
Clamp Torque	412 lbf
Rolling Element	Roller
Enclosure	Open
Overall Width	0.63 in, 15.88 mm
Outer Ring Width	0.63 in, 15.88 mm
Relubricatable	No
Housing Bore [Max]	1.313 in
Precision Ground	Yes
Tolerance	Iso Class 0 (RBEC 1)
Capacity	Standard Capacity
Bearing Design	Roller Clutch
Origin	Roller Clutches
Operating Temperature [Min]	-22 ˚F
Series	RC
Cage Type	Window
Self Aligning	No
Relubrication Feature	No
O.D.	1.3125 in
Weight	0.007 LB
EAN or UPC	605790193101