RC-101410

Single Row Steel Needle Roller Bearing

Item #101711005

Auto Replenish

each One-time purchase

Product Details

Transmits torque between the shaft and the housing in one direction, and allows free overrun in the opposite direction. The patented design utilizes the same low profile and radial section as drawn cup needle roller bearings. The units are compact, light in weight, and operate directly on a hardened shaft.

-FS" in the suffix for the RC and RCB call out stainless steel springs and are capable of higher operating temperatures and significantly higher engagements per minute
A polymer spring is standard for the RC and RCB
A stainless steel spring is standard for the FC, FCS, FCL, FCB and FCBL
A hardened and machined shaft or an "IR" Inner Ring is required for optimal performance
A press fit into the housing is required

Specifications

Operating Temperature [Max]	230 ˚F
Clamp Torque	143 lbf
End Type	Open End
Capacity	Standard Capacity
Cage Material	Polymer
Housing Bore [Max]	0.8755 in
Bearing Material	1014 Steel
Housing Bore [Min]	0.8745 in
I.D.	0.63 in, 15.91 mm
Rolling Element	Roller
Housing Shoulder Diameter	1.2 in
Speed (Max) Oil	14000 rpm
Precision Class	ABEC 1
No. of Rows	Single
Radial Internal Clearance	N/A
Component	Assembly
Outer Ring Width	0.63 in, 15.88 mm
Series	RC
Mounting Method	Press Fit
O.D. Type	Straight
Relubricatable	No
Operating Temperature [Min]	-22 ˚F
Lubricant	Rust Preventative
Shaft Dia. [Max]	0.625 in
Radial Internal Clearance Specification	N/A
Cage Type	Window
Tolerance	Iso Class 0 (RBEC 1)
Self Aligning	No
O.D.	0.88 in, 22.24 mm
Relubrication Feature	No
Precision Ground	Yes
Bearing Design	Roller Clutch
Oil Hole	w/o Oil Hole
Bore Type	Round
Overall Width	0.63 in, 15.88 mm
Origin	Roller Clutches
Enclosure	Open
Shaft Dia. [Min]	0.6245 in
Weight	0.004 LB
EAN or UPC	605790193095