RC-101410-FS

Single Row Steel Needle Roller Bearing

Item #101737997

Auto Replenish

each One-time purchase

Product Details

Transmits torque between the shaft and the housing in one direction, and allows free overrun in the opposite direction. The patented design utilizes the same low profile and radial section as drawn cup needle roller bearings. The units are compact, light in weight, and operate directly on a hardened shaft.

-FS" in the suffix for the RC and RCB call out stainless steel springs and are capable of higher operating temperatures and significantly higher engagements per minute
A polymer spring is standard for the RC and RCB
A stainless steel spring is standard for the FC, FCS, FCL, FCB and FCBL
A hardened and machined shaft or an "IR" Inner Ring is required for optimal performance
A press fit into the housing is required

Specifications

Enclosure	Open
Lubricant	Rust Preventative
Oil Hole	w/o Oil Hole
Bearing Design	Roller Clutch
Clamp Torque	143 lbf
Precision Class	ABEC 1
O.D. Type	Straight
End Type	Open End
Series	RC
Operating Temperature [Min]	-22 ˚F
Origin	Roller Clutches
Housing Bore [Max]	0.8755 in
Radial Internal Clearance	N/A
Component	Assembly
Tolerance	Iso Class 0 (RBEC 1)
Rolling Element	Roller
Relubrication Feature	No
Speed (Max) Oil	14000 rpm
Precision Ground	Yes
Radial Internal Clearance Specification	N/A
Mounting Method	Press Fit
Self Aligning	No
I.D.	5/8 in
Bore Type	Round Bore, Inch Type
Relubricatable	No
No. of Rows	1
Capacity	Standard Capacity
Cage Material	Nylon
Housing Bore [Min]	0.8745 in
Outer Ring Width	0.63 in, 15.88 mm
Cage Type	Window
Shaft Dia. [Max]	0.625 in
Bearing Material	1014 Steel
Housing Shoulder Diameter	1.2 in
Overall Width	0.63 in, 15.88 mm
O.D.	0.875 in
Operating Temperature [Max]	230 ˚F
Shaft Dia. [Min]	0.6245 in
Weight	0.004 LB
EAN or UPC	605790214172