RC-061008

Single Row Steel Needle Roller Bearing

Item #101711600

Auto Replenish

each One-time purchase

Product Details

Transmits torque between the shaft and the housing in one direction, and allows free overrun in the opposite direction. The patented design utilizes the same low profile and radial section as drawn cup needle roller bearings. The units are compact, light in weight, and operate directly on a hardened shaft.

-FS" in the suffix for the RC and RCB call out stainless steel springs and are capable of higher operating temperatures and significantly higher engagements per minute
A polymer spring is standard for the RC and RCB
A stainless steel spring is standard for the FC, FCS, FCL, FCB and FCBL
A hardened and machined shaft or an "IR" Inner Ring is required for optimal performance
A press fit into the housing is required

Specifications

Rolling Element	Roller
Bore Type	Round Bore, Inch Type
End Type	Open End
Tolerance	Iso Class 0 (RBEC 1)
Precision Class	ABEC 1
No. of Rows	1
Enclosure	Open
Mounting Method	Press Fit
Oil Hole	w/o Oil Hole
Radial Internal Clearance	N/A
Housing Bore [Max]	0.6255 in
I.D.	3/8 in
Operating Temperature [Max]	230 ˚F
Capacity	Standard Capacity
Component	Assembly
Series	RC
Housing Bore [Min]	0.6245 in
Shaft Dia. [Min]	0.3745 in
Housing Shoulder Diameter	0.88 in
O.D.	0.625 in
Precision Ground	Yes
Shaft Dia. [Max]	0.375 in
Relubrication Feature	No
Cage Type	Window
Self Aligning	No
Origin	Roller Clutches
Cage Material	Plastic
O.D. Type	Straight
Overall Width	0.5 in, 12.7 mm
Bearing Material	1014 Steel
Outer Ring Width	0.5 in, 12.7 mm
Radial Internal Clearance Specification	N/A
Relubricatable	No
Clamp Torque	45.4 lbf
Operating Temperature [Min]	-22 ˚F
Bearing Design	Roller Clutch
Speed (Max) Oil	18000 rpm
Lubricant	Rust Preventative
Weight	0.003 LB
EAN or UPC	605790201721