Skip to content Skip to navigation menu
Steel 7.48 in ID Deep Groove Ball Bearing

6238C3FY

Steel 7.48 in ID Deep Groove Ball Bearing
Item #102113884
  • 7.48 in Inner Diameter
  • 13.39 in Outer Diameter
  • Deep Groove Bearing
  • 2.17 in Overall Width
  • Steel Bearing
  • Single Row
  • Straight OD
+ Show More + Show Less
Steel 7.48 in ID Deep Groove Ball Bearing
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • 7.48 in Inner Diameter
  • 13.39 in Outer Diameter
  • Deep Groove Bearing
  • 2.17 in Overall Width
  • Steel Bearing

features

  • Best used for moderate radial and low axial load applications
  • Made from premium high carbon, high chromium Japanese steel
  • Available with steel (no callout) or brass (FY) cage
  • Available with seals (2RD, 2RS, 2RU), shields (ZZ), open and/or with a snap ring (NR) options
  • All double sealed and double shielded product come with Polyrex XM Grease
  • The 2RD Seal is used for high speed and/or reduced drag applications in addition to applications that require maximum sealing ability
  • Available in miniature (EE) inch product
  • Available with cermamic balls (3NCH or 3NC in prefix)
  • Available in max capacity/special heat treat (RSH2 in suffix)
Static Load Rating 281 kN
Inner Ring Width 55 mm
Enclosure Open
Bearing Type Deep Groove
Cage Type Machined
Contact Angle 0°
Fillet Radius 0.12 in, 3 mm
Overall Width 2.17 in, 55 mm
Series 6200
Self Aligning No
Ball Material Steel
Preload Level None
Outer Ring Width 55 mm
Capacity Standard Capacity
No. in Set Single Bearing
Speed (Max) Oil 2000 rpm
Origin Single Row Radial
Seal Type Unsealed
Seal Material None
Inch/Metric Metric Bore
Precision Level Standard (ABEC 1)
icNumber 7699399
Rows of Balls Single
Relubricatable No
Component Assembly
I.D. 7.48 in, 190 mm
Dynamic Load Rating 319 kN
Speed (Max) Grease 1700 rpm
Radial Internal Clearance C3
Precision Standard
Width 55.000 mm
Precision Class Class 0
Lubricant Rust Preventative
Radial Internal Clearance Specification Greater Than Normal Clearance
Locking Device No Locking Device
Bore Type Round
Snap Ring No Snap Ring
Internal Clearance C3
Operating Temperature [Max] 248 ËšF
Material Steel
Bearing Material Steel
Rolling Element Ball
O.D. 13.39 in, 340 mm
O.D. Type Straight
Cage Material Brass
Rolling Element Material High Carbon Chromium Bearing Steel
Operating Temperature [Min] -22 ËšF
Weight 51.98 LB
EAN or UPC 605790070143
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison