Hub City | PB220X1 1/4S | PB220 Series Cast Iron Pillow Block

PB220X1 1/4S

PB220 Series Cast Iron Pillow Block

Item #101032781

Cast Iron

Regreasable

Contact Seals

+ Show More

Auto Replenish

each One-time purchase

Product Details

Molded glass fiber reinforced polyamide retainer
Grade 10 balls
Races and balls are 52100 steel, hardened, ground, and honed for quiet operation
Slotted bolt holes
Rugged cast iron or Hub-Alloy® housing
Zone-hardened inner race
Prelubricated with high quality lithium grease. 1/4-28 Zerk fitting provided to allow for relube
Choice of narrow or wide inner race, setscrew locking or eccentric collar locking, normal-duty, or medium-duty bearings
Knurled cup point setscrews at 120° to minimize inner ring distortion
Recessed housing base to accommodate uneven mounting surfaces
Spherical outer race to allow up to 1.5° misalignment
All bearings have single lip Nitrile rubber seals with steel trash guard
Steel fingers are standard on wide inner race bearings only

Specifications

Base Width	1 3/4 in
Housing Width	1 3/4 in
Series	PB220
Length Through Bore	1.406 in
Bolt Holes	2
Insert Type	Steel Insert
Bolt Hole Spacing	4 11/16 in
Bolt Hole Spacing Range [Min]	4 1/4 in
Base Height	5/8 in
Bearing Insert	B220X1 1/4S
Collar O.D.	1.71 in
Temperature Range [Min]	-25 °F
Lubrication	Relubricatable
Bolt Hole Spacing Range [Max]	5 1/8 in
Bearing Type	Ball Bearing
Pillow Block Type	Thru-Bolt
Seal Type	Contact Seals
Center of Bearing to Front of Inner Ring	1.051 in
Bearing Design	Non-Expansion
Housing Height	3 1/8 in
Bolt Size	1/2 in
Inch/Metric	Inch
Mounted Unit Duty	Normal-Duty
Shaft Dia.	1.25 in
Locking Device	Eccentric Locking Collar
Housing Construction	1 Piece
Temperature Range [Max]	225 °F
Misalignment Range	±1 1/2°
End Type	Open End
Housing Material	Cast Iron
Overall Width	1 59/64 in
Base Length	6 3/8 in
Weight	3.0 LB
EAN or UPC	662798247496

PB220X1 1/4S