Find a Service Center
Alternate Products
- 1.25" Shaft, Tri-Ply Shroud Seals, Eccentric Collar, Regreasable
description
- TCJT flange cartridges are basically the same design as the TCJ type, except they have two bolt holes instead of four. They are designed chiefly to fill the need for applications where the mounting area is restricted. These units are factory prelubricated, but a grease fitting is provided for relubrication if required. All units are supplied with self-locking collars.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Housing Length | 5 9/16 in |
| Housing No. | T-21548P |
| Bearing Design | Non-Expansion |
| Style | 2-Bolt Flange |
| Overall Width | 1.99 in |
| Bolt Hole Size | 29/64 in |
| Seal Type | Tri-Ply Shroud Seals |
| Housing Width | 1 1/4 in |
| Housing Material | Cast Iron |
| Flange Thickness | 0.531 in |
| Lubrication | Relubricatable |
| Bearing Insert | G1103KPPB4 |
| Dynamic Load Rating | 4800 lbf |
| Mounted Unit Duty | Normal-Duty |
| Housing Construction | 1 Piece |
| Outer Ring Size | 206 |
| Shaft Dia. | 1.25 in |
| End Type | Open End |
| Bearing Type | Ball Bearing |
| Housing Height | 3 1/8 in |
| Duty | Normal-Duty |
| Flange Type | 2-Bolt Flange |
| Inch/Metric | Inch |
| Locking Device | Eccentric Locking Collar |
| Bolt Hole Spacing | 4 19/32 in |
| Weight | 2.48 LB |
| EAN or UPC | 87796058712 |
