Find a Service Center
- 0.75" Shaft, 1.3125" Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- The new Fafnir STB series two-bolt housed units are furnished assembled and ready for mounting by means of two bolts from under the housing.These units are ideal for applications where space is limited, access to bolt screws is from bottom of unit, loads are not severe and reversing moments are not enountered.The units are assembled with GYA-RRB bearings with positive contact land riding seals, and setscrew locking.These units are factory prelubricated, but a grease fitting is provided for relubrication if required.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Base Length | 2 7/8 in |
| Bolt Holes | 2 |
| Shaft Dia. | 0.75 in |
| Bolt Hole Spacing | 2 in |
| Housing Construction | 1 Piece |
| Bearing Insert | GYA012RRB |
| Bolt Hole Spacing Range [Max] | 2 in |
| Bolt Hole Spacing Range [Min] | 2 in |
| Bearing Type | Ball Bearing |
| Bearing Design | Non-Expansion |
| Series | STB Series |
| Housing Material | Cast Iron |
| Housing Height | 2 13/32 in |
| Bolt Size | 3/8-16 |
| Insert Type | Steel Insert |
| Lubrication | Relubricatable |
| Inch/Metric | Inch |
| End Type | Open End |
| Base Width | 1 7/16 in |
| Pillow Block Type | Tapped Base |
| Base Height | N/A |
| Mounted Unit Duty | Normal-Duty |
| Overall Width | 1 7/16 in |
| Locking Device | Setscrew Locking Collar |
| Seal Type | Contact Seals |
| Weight | 1.349 LB |
| EAN or UPC | 87796195653 |
