Find a Service Center
- 2.4375" Shaft, 4.125" Base to Center, Cast Iron Housing, 2-Bolt Pillow Block, Contact Seals, Eccentric Collar
description
- Fafnir SAOL type heavy series pillow blocks are designed for applications where higher-than-usual temperature applications where for any reason one or more floating bearing units required. The floating unit allows its bearing to move axially as the shaft expands because of the temperature rise, while the fixed unit maintains shaft location. Bearings also have loose internal fit. The SAOL unit is equipped with a heavy series, self-aligning SMN wide inner ring bearing and self-locking collar. An external aligning ring is fitted to the spherical surface of the outer ring. They are equipped with oil-tight seals and are normally fitted for oil lubrication, but can be equipped for grease lubrication when specified. NOTE: Lubricate with high grade automotive or turbine oil, or ball bearing grease before installation. All units are assembled with a spacer ring (Fixed type). By removing the spacer ring, the assembly becomes a floating unit.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Bolt Hole Length | 1 1/4 in |
| Inch/Metric | Inch |
| Pillow Block Type | Thru-Bolt |
| Collar No. | SN207K |
| Mounted Unit Duty | Heavy-Duty |
| Insert Type | Steel Insert |
| Base Width | 4 in |
| Bolt Holes | 2 |
| Seal Type | Contact Seals |
| Bolt Hole Spacing | 11 1/4 in |
| Base Length | 13 3/4 in |
| Housing No. | A-3819 |
| Bolt Size | 3/4 in |
| Total Float | 0.3438 in |
| Housing Material | Cast Iron |
| Housing Construction | 1 Piece |
| Bearing Insert | SMN207KS |
| Bolt Hole Width | 7/8 in |
| Bearing Type | Ball Bearing |
| Lubrication | Relubricatable |
| End Type | Open End |
| Overall Width | 5.9063 in |
| Shaft Dia. | 2.4375 in |
| Locking Device | Eccentric Locking Collar |
| Bearing Design | Expansion/Non-Expansion |
| Base Height | 1 1/16 in |
| Weight | 46.646 LB |
| EAN or UPC | 87796061729 |
