
- 2.6875" Shaft, 3.75" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir SAL type pillow blocks are designed for applications where higher-than-usual temperatures are encountered and for normal temperature applications where for any reason one or more floating bearing units are required.The floating unit allows its bearing to move axially as the shaft expands becaue of the temperature rise, while the fixed unit maintains shaft location.Bearings also have loose internal fit. The SAL unit is equipped with a self-aligning SM wide inner ring bearing and a self-locking collar.An external aligning ring is fitted to the spherical surface of the outer ring. They are equipped with oil-tight seals and are normally fitted for oil lubrication, but can be equipped for grease lubrication when specified. NOTE: Lubricate with high grade automotive or turbine oil, or ball bearing grease before installation. All units are assembled with a spacer ring (Fixed type).By removing the spacer ring, the assembly becomes a floating unit.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
Inch/Metric | Inch |
Series | SAL Series |
Housing Width | 6 3/4 in |
Bolt Size | 3/4 in |
Base Width | 3 1/2 in |
Housing No. | T-18940 |
Housing Material | Cast Iron |
Bearing Insert | SM1211KTS |
Base Length | 12 5/8 in |
Overall Width | 6 5/32 in |
Bearing Type | Ball Bearing |
Base Height | 1 1/16 in |
Bolt Hole Width | 7/8 in |
Total Float | 0.2813 in |
Bolt Hole Length | 1 1/8 in |
Seal Type | Contact Seals |
Bolt Hole Spacing | 10 1/4 in |
Bearing Design | Expansion/Non-Expansion |
Shaft Dia. | 2.6875 in |
Bolt Holes | 2 |
Pillow Block Type | Thru-Bolt |
Locking Device | Eccentric Locking Collar |
Insert Type | Steel Insert |
Mounted Unit Duty | Medium-Duty |
End Type | Open End |
Housing Construction | 1 Piece |
Lubrication | Relubricatable |
Collar No. | S1211K |
Length Through Bore | 6.15625 in |
Weight | 36.208 LB |
EAN or UPC | 87796061842 |
