
- 1.4375" Shaft, 2.375" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir SAL type pillow blocks are designed for applications where higher-than-usual temperatures are encountered and for normal temperature applications where for any reason one or more floating bearing units are required.The floating unit allows its bearing to move axially as the shaft expands becaue of the temperature rise, while the fixed unit maintains shaft location.Bearings also have loose internal fit. The SAL unit is equipped with a self-aligning SM wide inner ring bearing and a self-locking collar.An external aligning ring is fitted to the spherical surface of the outer ring. They are equipped with oil-tight seals and are normally fitted for oil lubrication, but can be equipped for grease lubrication when specified. NOTE: Lubricate with high grade automotive or turbine oil, or ball bearing grease before installation. All units are assembled with a spacer ring (Fixed type).By removing the spacer ring, the assembly becomes a floating unit.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
Bolt Hole Width | 3/4 in |
Bolt Holes | 2 |
Base Length | 8 1/4 in |
Bearing Type | Ball Bearing |
Total Float | 1/4 in |
Inch/Metric | Inch |
Locking Device | Eccentric Locking Collar |
End Type | Open End |
Base Height | 3/4 in |
Length Through Bore | 4.125 in |
Pillow Block Type | Thru-Bolt |
Housing Construction | 1 Piece |
Housing Width | 4 1/4 in |
Seal Type | Contact Seals |
Insert Type | Steel Insert |
Bolt Size | 5/8 in |
Bolt Hole Length | 1 in |
Overall Width | 4 1/8 in |
Housing No. | T-13108 |
Shaft Dia. | 1.4375 in |
Mounted Unit Duty | Medium-Duty |
Housing Material | Cast Iron |
Bearing Insert | SM1107KS |
Collar No. | S1107K |
Lubrication | Relubricatable |
Series | SAL Series |
Bearing Design | Expansion/Non-Expansion |
Bolt Hole Spacing | 6 1/4 in |
Base Width | 2 3/8 in |
Weight | 12.04 LB |
EAN or UPC | 87796059320 |
