Find a Service Center
- Single Row Radial Bearing, 0.625" ID x 1.375" OD x 0.281" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Enclosure | Open |
| Locking Device | No Locking Device |
| Material | Steel |
| Contact Angle | 0° |
| Precision | Standard |
| Radial Internal Clearance | C3 |
| Origin | Single Row Radial |
| Width | 9/32 in |
| No. in Set | Single Bearing |
| Dynamic Load Rating | 1,700.00 lbf |
| Bore Type | Round Bore |
| Lubricant | Oil Preservative |
| Pre Lubricant | None |
| Rows of Balls | Single |
| Inch/Metric | Inch Bore |
| Outer Ring Width | 9/32 in |
| Seal Type | Unsealed |
| Fillet Radius | 0.031 in |
| Ball Material | Steel |
| Precision Level | Standard (ABEC 1) |
| Bearing Type | Radial |
| Seal Material | None |
| Cage Material | Steel |
| Cage Type | Metal |
| O.D. Type | Straight |
| O.D. | 1 3/8 in |
| Inner Ring Width | 0.281 in |
| Preload Level | None |
| icNumber | 7697622 |
| Capacity | Standard Capacity |
| Open Width | 9/32 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Snap Ring | No Snap Ring |
| I.D. | 5/8 in |
| Closed Width | 11/32 in |
| Static Load Rating [Max] | 682.00 lbf |
| Weight | 0.088 LB |
| EAN or UPC | 87796044715 |
| NSN Number | 3110-00-554-3341 |
