Find a Service Center
- 2.6875" Shaft, 4.5625" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Bolt Size | 7/8 in |
| Housing Height | 8 9/32 in |
| Mounted Unit Duty | Heavy-Duty |
| Bearing Design | Non-Expansion |
| Collar No. | SO211K |
| Bolt Hole Width | 1 3/8 in |
| Bolt Hole Length | 1 in |
| End Type | Open End |
| Housing Material | Cast Iron |
| Base Length | 15 3/8 in |
| Overall Width | 4 3/8 in |
| Bearing Type | Ball Bearing |
| Base Height | 1 3/4 in |
| Length Through Bore | 3.5 in |
| Inch/Metric | Inch |
| Pillow Block Type | Thru-Bolt |
| Locking Device | Eccentric Locking Collar |
| Collar O.D. | 4 in |
| Shaft Dia. | 2.6875 in |
| Bolt Hole Spacing | 12 in |
| Seal Type | Contact Seals |
| Bearing Insert | GN211KRRB |
| Insert Type | Steel Insert |
| Housing Width | 7 7/16 in |
| Series | RSAO Series |
| Base Width | 4 3/8 in |
| Housing Construction | 1 Piece |
| Bolt Holes | 2 |
| Lubrication | Relubricatable |
| Weight | 41.948 LB |
| EAN or UPC | 87796061828 |
