Find a Service Center
- 1.1875" Shaft, 1.6875" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- HVAC
- Chemical industry
- Maritime industry
- Food and beverage
- Material handling
- Highly corrosive environments
- Dairy and refrigeration
compliances
- 0
| Locking Device | Eccentric Locking Collar |
| Inch/Metric | Inch |
| Base Length | 6 3/16 in |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Overall Width | 1 31/32 in |
| Temperature Range [Max] | 250 °F |
| End Type | Open End |
| Static Load Rating [Max] | 2500 lbf |
| Housing Height | 3 9/32 in |
| Series | RAS Series |
| Housing Construction | 1 Piece |
| Base Height | 21/32 in |
| Collar O.D. | 1 3/4 in |
| Seal Type | Contact Seals |
| Length Through Bore | 1.4375 in |
| Bolt | 1/2 in |
| Base Width | 1 9/16 in |
| Housing Material | Polymer |
| Bolt Hole Length | 15/16 in |
| Bearing Design | Non-Expansion |
| Bearing Insert | G1103KRRB TDCF |
| Outer Ring Size | 206 |
| Dynamic Load Rating | 4900 lbf |
| Bearing Type | Ball Bearing |
| Shaft Dia. | 1.1875 in |
| Pillow Block Type | Thru-Bolt |
| Bolt Hole Spacing | 4 5/8 in |
| Bolt Hole Width | 9/16 in |
| Lubrication | Relubricatable |
| Bolt Holes | 2 |
| Weight | 1.19 LB |
| EAN or UPC | 87796180147 |
-
![HACCP Friendly]()
HACCP Friendly
