Fafnir | RAK2 | RAK Series Cast Iron Pillow Block

RAK2

RAK Series Cast Iron Pillow Block

Item #101922069

2" Shaft, 2.4375" Base to Center, Cast Iron Housing, 2-Bolt Pillow Block, Contact Seals, Eccentric Collar

Auto Replenish

each One-time purchase

Product Details

2" Shaft, 2.4375" Base to Center, Cast Iron Housing, 2-Bolt Pillow Block, Contact Seals, Eccentric Collar

Recommended for industrial applications where normal loads are encountered. They ensure the user the advantages of a compact, one-piece housing, which can be mounted in any position. The pillow blocks are self aligning at mounting with the spherical O.D. of the bearing fitting into a corresponding spherical housing seat. These units are prelubricated and ready for immediate installation. A grease fitting provides for relubrication if required. Self-locking collars are supplied with all units.

Specifications

Bolt Hole Spacing	6 15/16 in
Series	RAK Series
Bearing Type	Ball Bearing
Housing Construction	1 Piece
Collar No.	S1200K
Bearing Design	Non-Expansion
Outer Ring Size	211
Bolt Size	5/8 in
Bearing Insert	G1200KRRB
Length Through Bore	2 3/16 in
Insert Type	Steel Insert
Base Width	2 5/16 in
Base Length	8 3/4 in
Base Height	3/4 in
Overall Width	2 7/8 in
Collar O.D.	3 in
Pillow Block Type	Thru-Bolt
Seal Type	Contact Seals
Bolt Hole Length	1 5/32 in
Mounted Unit Duty	Normal-Duty
Housing Material	Cast Iron
Bolt Hole Width	23/32 in
Locking Device	Eccentric Locking Collar
Lubrication	Relubricatable
Inch/Metric	Inch
Bolt Holes	2
Housing Height	4 29/32 in
End Type	Open End
Center Line to Base Dimension [Min]	2 7/16 in
Dynamic Load Rating	10,800.00 lbf
Shaft Dia.	2 in
Weight	8.626 LB
EAN or UPC	87796060913