Find a Service Center
- 1.375" Shaft, 1.8125" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Dynamic Load Rating | 6400 lbf |
| Inch/Metric | Inch |
| Bolt Hole Width | 9/16 in |
| Pillow Block Type | Thru-Bolt |
| Base Length | 6 9/16 in |
| Housing Material | Polymer |
| Series | RAK Series |
| Bolt Hole Length | 31/32 in |
| Housing Height | 3 5/8 in |
| Seal Type | Contact Seals |
| Temperature Range [Max] | 250 °F |
| Shaft Dia. | 1.375 in |
| Bearing Insert | G1106KRRB TDCF |
| Length Through Bore | 1.48438 in |
| Base Height | 21/32 in |
| Bolt Holes | 2 |
| Bolt | 1/2 in |
| Bearing Type | Ball Bearing |
| Overall Width | 2 11/64 in |
| Base Width | 1 25/32 in |
| End Type | Open End |
| Bearing Design | Non-Expansion |
| Outer Ring Size | 207 |
| Collar No. | S1106K |
| Housing Construction | 1 Piece |
| Locking Device | Eccentric Locking Collar |
| Lubrication | Relubricatable |
| Collar O.D. | 2 1/8 in |
| Bolt Hole Spacing | 5 1/8 in |
| Static Load Rating [Max] | 3400 lbf |
| Weight | 1.73 LB |
| EAN or UPC | 87796180093 |
-
![HACCP Friendly]()
HACCP Friendly
