Find a Service Center
- 2.1875" Shaft, 3.75" Base to Center, Cast Iron Housing, 2-Bolt Pillow Block, Labyrinth Seals, Eccentric Collar
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Bearing Insert | GN203KLLB |
| Mounted Unit Duty | Heavy-Duty |
| Insert Type | Steel Insert |
| Bolt Hole Width | 7/8 in |
| Shaft Dia. | 2.1875 in |
| Bearing Type | Ball Bearing |
| Collar No. | SN203K |
| Base Width | 3 1/2 in |
| Housing Construction | 1 Piece |
| Locking Device | Eccentric Locking Collar |
| Temperature Range [Max] | 350 °F |
| Bolt Hole Spacing | 10 1/4 in |
| Pillow Block Type | Thru-Bolt |
| Bolt Holes | 2 |
| Inch/Metric | Inch |
| Bolt Hole Length | 1 3/8 in |
| Housing Material | Cast Iron |
| Lubrication | Relubricatable |
| Seal Type | Labyrinth Seals |
| Base Height | 1 7/16 in |
| Base Length | 12 5/8 in |
| Bearing Design | Non-Expansion |
| End Type | Open End |
| Weight | 21.282 LB |
| EAN or UPC | 87796061187 |
