Find a Service Center
- 1.5" Shaft, 3.125" Base to Center, Labyrinth Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Base Height | 1 1/16 in |
| Bolt Size | 5/8 in |
| Length Through Bore | 2.25 in |
| Collar O.D. | 2 1/2 in |
| Seal Type | Labyrinth Seals |
| Shaft Dia. | 1.5 in |
| Bolt Holes | 2 |
| Bolt Hole Width | 1 1/8 in |
| Overall Width | 3 1/8 in |
| Base Length | 11 3/8 in |
| Temperature Range [Max] | 350 °F |
| Series | LSAO Series |
| Housing Material | Cast Iron |
| Bearing Insert | GN108KRRB |
| Mounted Unit Duty | Heavy-Duty |
| Bolt Hole Spacing | 9 in |
| Housing Height | 5 3/8 in |
| End Type | Open End |
| Insert Type | Steel Insert |
| Pillow Block Type | Thru-Bolt |
| Locking Device | Eccentric Locking Collar |
| Housing Construction | 1 Piece |
| Lubrication | Relubricatable |
| Bolt Hole Length | 3/4 in |
| Housing Width | 4 1/2 in |
| Inch/Metric | Inch |
| Base Width | 3 1/8 in |
| Bearing Design | Non-Expansion |
| Bearing Type | Ball Bearing |
| Weight | 13.242 LB |
| EAN or UPC | 87796059535 |
