Find a Service Center
- 1.9375" Shaft, 3.5" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- The Fafnir double rigid pillow block, type DRNR, is designed to provide a sturdy two-bearing mounting for fans and blowers, bench grinders, buffers, vertical shafts, and similar heavy-duty applications. The compact, one-piece housing is equipped with two Fafnir wide inner ring bearings with integral, R-seals and self-locking collar. Individual grease chambers are provided for each bearing. Close-clearance baffles allow excess grease to work into the spacious center chamber of the housing. Grease fittings installed in place of the standard pipe plugs will provide means of relubrication. Type DRNR pillow blocks can be mounted in any position with ample radial and thrust capacity ensured at all times.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Seal Type | Contact Seals |
| Base Width | 7 in |
| Inch/Metric | Inch |
| Base Height | 1 1/8 in |
| Bolt Hole Spacing | 9 1/2 in |
| Bolt Size | 5/8 in |
| Housing Width | 4 7/8 in |
| Pillow Block Type | Thru-Bolt |
| Series | DRNR Series |
| Bolt Hole Width | 11/16 in |
| Mounted Unit Duty | Normal-Duty |
| Housing Height | 5 5/16 in |
| Base Length | 12 in |
| Bearing Insert | 1115KR |
| Housing Construction | 1 Piece |
| Overall Width | 13 7/8 in |
| Lubrication | Relubricatable |
| Bearing Design | Non-Expansion |
| Bolt Holes | 2 |
| Insert Type | Steel Insert |
| Bolt Hole Length | 1 1/8 in |
| Bearing Type | Ball Bearing |
| Housing Material | Cast Iron |
| End Type | Open End |
| Shaft Dia. | 1.9375 in |
| Locking Device | Eccentric Locking Collar |
| Length Through Bore | 13.875 in |
| Collar O.D. | 2 3/4 in |
| Weight | 37.034 LB |
| EAN or UPC | 87796060463 |
