Find a Service Center
- Single Row Angular Contact Bearing, 60 mm ID x 150 mm OD x 35 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Greater Than Normal Clearance (C3), 40° Contact Angle
description
- The angular contact Heavy 7400 series is dimensionally interchangeable with the radial 400 series.Those sizes with a "WN" suffix include a refined bore diameter tolerance. The 7400 series can sustain heavier thrust and combined loads than the 7300WN series. A single bearing is recommended for applications in which the thrust load is in one direciton or, in the case of combined loads, the thrust load is high in relation to the radial load.A duplex pair is recommended for application where thrust is present in both dirctions or where axial displacement of the shaft must be restricted.For exceptionally high thrust loads in one direction, a tandem pair can be utilized opposed by a third bearing. Those sizes with a suffix "W" have a 20° contact angle and a steel retainer.Those sizes with a suffix "PW" have a 35° contact angle and a a steel retainer.Those sizes with a "WN" suffix have a 40° contact angle and a one-piece, high-strength macined bronzed cage.
applications
- General industrial
- Agricultural
- Chemical
- Utilities
| Seal Material | None |
| Enclosure | Open |
| O.D. Type | Straight |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Internal Design | Universal Mounting |
| Outer Ring Width | 35 mm |
| Inner Ring Width | 35 mm |
| Cage Material | Brass/Bronze |
| Capacity | Standard Capacity |
| Locking Device | No Locking Device |
| Cage Type | Metal |
| Origin | Single Row Angular Contact |
| Inch/Metric | Metric Bore |
| Material | Steel |
| Bearing Type | Angular Contact |
| I.D. | 60 mm |
| Dynamic Load Rating | 30500 lbf |
| Contact Angle | 40° |
| O.D. | 150 mm |
| Snap Ring | No Snap Ring |
| Seal Type | Unsealed |
| Radial Internal Clearance | C3 |
| Ball Material | Steel |
| icNumber | 7695922 |
| Fillet Radius | 0.08 in |
| Precision | Standard |
| Bore Type | Round Bore |
| No. in Set | Single Bearing |
| Lubricant | Oil Preservative |
| Rows of Balls | Single |
| Preload Level | None |
| Precision Level | Standard (ABEC 1) |
| Static Load Rating [Max] | 19300 lbf |
| Weight | 6.877 LB |
| EAN or UPC | 87796068957 |
