Find a Service Center
- Single Row Angular Contact Bearing, 140 mm ID x 300 mm OD x 62 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Greater Than Normal Clearance (C3), 40° Contact Angle, Duplex (2) Set
description
- The angular contact medium 7300WN series is dimensionally interchangeable with the radial 300 series.The features of the 7000WN series include a refined bore diameter. The 7300WN series can sustain heavier thrust and combined loads applications in which the thrust load is in one direction or,in the case of combined loads, the thrust load is high in relation to the radial load. A duplex pair is recommended for application where thrust is present in both directions or where axial displacement of the shaft must be restricted. For exceptionally high thrust loads in one direction, a tandem pair can be utilized opposed by a third bearing. Size 7303W have a 20° contact angle and a steel cage.Sizes 7304WN through 7318WN have a 40° contact angle and a one-piece, ball poloted, pressed brass cage. Larger sizes 7319WN through 7330WN have a 40° contact angle and a one-piece, outer-ring-piloted, high strength, machined bronze cage.Sizes 7306WN to 7318WN also available with a one-piece, high strength, machined bronze retainer (MBR).
applications
- General industrial
- Agricultural
- Chemical
- Utilities
| O.D. Type | Straight |
| Inner Ring Width | 62 mm |
| Dynamic Load Rating | 76500 lbf |
| No. in Set | Duplex Set |
| Inch/Metric | Metric Bore |
| Preload Level | None |
| Cage Type | Metal |
| icNumber | 7699071 |
| Material | Steel |
| Origin | Single Row Angular Contact |
| Bearing Type | Angular Contact |
| Snap Ring | No Snap Ring |
| Seal Type | Unsealed |
| Bore Type | Round Bore |
| Static Load Rating [Max] | 78000 lbf |
| Rows of Balls | Single |
| Outer Ring Width | 62 mm |
| O.D. | 300 mm |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Seal Material | None |
| Enclosure | Open |
| Capacity | Standard Capacity |
| Lubricant | Oil Preservative |
| Cage Material | Brass/Bronze |
| Fillet Radius | 0.118 in |
| Contact Angle | 40° |
| Precision | Standard |
| I.D. | 140 mm |
| Locking Device | No Locking Device |
| Precision Level | Standard (ABEC 1) |
| Radial Internal Clearance | C3 |
| Ball Material | Steel |
| Weight | 89.4 LB |
| EAN or UPC | 87796068872 |
