Find a Service Center
- Single Row Angular Contact Bearing, 60 mm ID x 130 mm OD x 31 mm Wide, Open, Standard Precision (ABEC 1), Brass / Bronze Cage, Greater Than Normal Clearance (C3), 40° Contact Angle
description
- The angular contact medium 7300WN series is dimensionally interchangeable with the radial 300 series.The features of the 7000WN series include a refined bore diameter. The 7300WN series can sustain heavier thrust and combined loads applications in which the thrust load is in one direction or,in the case of combined loads, the thrust load is high in relation to the radial load. A duplex pair is recommended for application where thrust is present in both directions or where axial displacement of the shaft must be restricted. For exceptionally high thrust loads in one direction, a tandem pair can be utilized opposed by a third bearing. Size 7303W have a 20° contact angle and a steel cage.Sizes 7304WN through 7318WN have a 40° contact angle and a one-piece, ball poloted, pressed brass cage. Larger sizes 7319WN through 7330WN have a 40° contact angle and a one-piece, outer-ring-piloted, high strength, machined bronze cage.Sizes 7306WN to 7318WN also available with a one-piece, high strength, machined bronze retainer (MBR).
applications
- General industrial
- Agricultural
- Chemical
- Utilities
| Enclosure | Open |
| Dynamic Load Rating | 22800 lbf |
| Capacity | Standard Capacity |
| Inch/Metric | Metric Bore |
| Cage Material | Brass/Bronze |
| Precision Level | Standard (ABEC 1) |
| Bearing Type | Angular Contact |
| Ball Material | Steel |
| icNumber | 7695810 |
| Fillet Radius | 0.079 in |
| O.D. Type | Straight |
| Radial Internal Clearance | C3 |
| Seal Type | Unsealed |
| Snap Ring | No Snap Ring |
| Internal Design | Universal Mounting |
| O.D. | 130 mm |
| Bore Type | Round Bore |
| Static Load Rating [Max] | 14600 lbf |
| No. in Set | Single Bearing |
| Preload Level | None |
| Material | Steel |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| I.D. | 60 mm |
| Outer Ring Width | 31 mm |
| Locking Device | No Locking Device |
| Cage Type | Metal |
| Contact Angle | 40° |
| Seal Material | None |
| Precision | Standard |
| Lubricant | Oil Preservative |
| Origin | Single Row Angular Contact |
| Inner Ring Width | 31 mm |
| Rows of Balls | Single |
| Weight | 1.9 KG |
| EAN or UPC | 87796068636 |
