Find a Service Center
- 6 1/2" Maximum Diameter
- 2.8" Stroke Length
- 2" Compressed Height
- 1/4" Port Size
description
- Enidine Air Springs are highly durable, precisely engineered and cost effective for use in a wide variety of actuation and vibration isolation applications. With time-tested designs, fabric-reinforced Neoprene or Natural Rubber flex member construction and corrosion-protected end retainers, Enidine Air Springs provide superior quality and performance. As an actuator, Enidine Air Springs provide linear or angular motion. As an isolator, air springs are effective in reducing the harmful effects of vibration.
features
- Temperature range from -40 °F to 150 °F
- Manufactured by Goodyear
- Maximum inflation pressure 100 psi
- Little space required
- No sealing required
- Maximum tilt angle of 25°
- Provides linear and angular motion
- Provides angular motion
| Blind Tap Spacing | 2 3/4 in |
| Temperature Range [Min] | -40 °F |
| Convolutions | Single |
| Force @ 4 in Stroke | N/A |
| Force @ 8 in Stroke | N/A |
| End Closure | Style 3 End Retainer |
| Pressure [Max] | 100 psi |
| Force @ 5 in Stroke | N/A |
| Fill Port Offset | 1 3/8 in |
| Bellows Type | Single Convolution |
| Force @ Stroke (80 psi) | 850 lbf @ 3 in, 2000 lbf @ 1 in, 2000 lbf @ 2 in |
| Air Inlet Type | NPT |
| Force @ 12 in Stroke | N/A |
| Recommended Isolator Design Height [Max] | 4 in |
| Force @ Maximum Stroke (80 psi) | 850 lbf |
| Force @ 3 in Stroke | N/A |
| Compressed Height | 2 in |
| End Plate Diameter | 4.15 in |
| Recommended Isolator Design Height [Min] | 3 in |
| Force @ 1 in Stroke | 1900 lbf |
| Style No. | YI-1B |
| Force @ 6 in Stroke | N/A |
| Air Inlet | 1/4 in |
| Bumpers | w/o Bumpers |
| Temperature Range [Max] | 150 °F |
| Force @ 2 in Stroke | 1500 lbf |
| Stroke Length [Max] | 2.800 in |
| Force @ 9 in Stroke | N/A |
| Weight | 3.3 LB |
