Find a Service Center
- 3/8" Pitch
- L Belt Type
- 1/2" Belt Width
- 84 Teeth
- 10.027" Pitch Diameter
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- If the drive has more than three pulleys, every other pulley should be flanged
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
| Type | C-2 |
| Belt Pitch | 0.375 in |
| Bore Type | Taper-Lock and QD Bushed |
| Bore Range [Max] | 2.5 in |
| Bore Range [Min] | 0.5 in |
| Finished Bore | N/A |
| Bushing Series | 2517 |
| Pitch Diameter | 10.027 in |
| Hub Dia. | 4.38 in |
| No. of Teeth | 84 |
| Length Through Bore | 1.75 in |
| Outside Dia. | 9.997 in |
| Belt Size | L |
| Hub Projection | 1/2 in |
| Belt Width | 0.5 in |
| Bushing Type | Taperlock |
| Weight | 16.83 LB |
| EAN or UPC | 782475576371 |
