Find a Service Center
- 1/2" Pitch
- H Belt Type
- 3" Belt Width
- 60 Teeth
- 9.549" Pitch Diameter
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- If the drive has more than three pulleys, every other pulley should be flanged
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
| Belt Size | H |
| Belt Pitch | 0.5 in |
| Bushing Series | 3020 |
| Hub Dia. | 0 in |
| No. of Teeth | 60 |
| Pitch Diameter | 9.549 in |
| Length Through Bore | 2 in |
| Belt Width | 3 in |
| Outside Dia. | 9.495 in |
| Bore Range [Min] | 0.875 in |
| Bore Range [Max] | 3 in |
| Bushing Type | Taperlock |
| Finished Bore | N/A |
| Bore Type | Taper-Lock and QD Bushed |
| Type | A-2 |
| Hub Projection | 0.69 in |
| Weight | 28.0 LB |
| EAN or UPC | 782475088829 |
