Find a Service Center
- 3/8" Pitch
- L Belt Type
- 1" Belt Width
- 24 Teeth
- 2.865" Pitch Diameter
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Bore Range [Max] | 1.25 in |
| Type | KF-1 |
| Belt Width | 1 in |
| Outside Dia. | 2.835 in |
| Bushing Series | 1210 |
| Hub Projection | 0.06 in |
| Hub Dia. | N/A |
| Bore Range [Min] | 0.5 in |
| No. of Teeth | 24 |
| Finished Bore | N/A |
| Bore Type | Taper-Lock and QD Bushed |
| Pitch Diameter | 2.865 in |
| Belt Pitch | 0.375 in |
| Bushing Type | Taperlock |
| Belt Size | L |
| Length Through Bore | 1 in |
| Weight | 1.1 LB |
| EAN or UPC | 782475088256 |
