Find a Service Center
- 7/8" Pitch
- XH Belt Type
- 3" Belt Width
- 22 Teeth
- 6.127" Pitch Diameter
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- If the drive has more than three pulleys, every other pulley should be flanged
| Hub Projection | 0.94 in |
| Hub Dia. | N/A |
| Bushing Series | 2517 |
| Length Through Bore | 1.75 in |
| Bushing Type | Taperlock |
| Type | KF-1 |
| No. of Teeth | 22 |
| Bore Type | Taper-Lock and QD Bushed |
| Bore Range [Min] | 0.5 in |
| Outside Dia. | 6.017 in |
| Belt Pitch | 0.875 in |
| Finished Bore | N/A |
| Belt Width | 3 in |
| Bore Range [Max] | 2.5 in |
| Belt Size | XH |
| Pitch Diameter | 6.127 in |
| Weight | 16.4 LB |
| EAN or UPC | 782475088966 |
