Find a Service Center
- 7/8" Pitch
- XH Belt Type
- 2" Belt Width
- 22 Teeth
- 6.127" Pitch Diameter
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Bushing Series | 2517 |
| Belt Size | XH |
| Finished Bore | N/A |
| Belt Width | 2 in |
| Bushing Type | Taperlock |
| Bore Range [Max] | 2.5 in |
| Outside Dia. | 6.017 in |
| Type | KF-1 |
| Hub Projection | 0.81 in |
| Hub Dia. | N/A |
| No. of Teeth | 22 |
| Bore Range [Min] | 0.5 in |
| Length Through Bore | 1.75 in |
| Pitch Diameter | 6.127 in |
| Bore Type | Taper-Lock and QD Bushed |
| Belt Pitch | 0.875 in |
| Weight | 4.66 LB |
| EAN or UPC | 782475088850 |
