Find a Service Center
- 1/2" Pitch
- H Belt Type
- 3" Belt Width
- 22 Teeth
- 3.501" Pitch Diameter
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
| Hub Dia. | 0 in |
| Pitch Diameter | 3.501 in |
| Length Through Bore | 1.5 in |
| Hub Projection | 0.94 in |
| Belt Pitch | 0.5 in |
| Belt Width | 3 in |
| Bore Range [Max] | 1.625 in |
| Bushing Type | Taperlock |
| Finished Bore | N/A |
| Bore Range [Min] | 0.5 in |
| Belt Size | H |
| No. of Teeth | 22 |
| Bore Type | Taper-Lock and QD Bushed |
| Type | KF-1 |
| Outside Dia. | 3.45 in |
| Bushing Series | 1615 |
| Weight | 3.96 LB |
| EAN or UPC | 782475088744 |
