Find a Service Center
- 1/2" Pitch
- H Belt Type
- 1 1/2" Belt Width
- 22 Teeth
- 3.501" Pitch Diameter
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Belt Pitch | 0.5 in |
| No. of Teeth | 22 |
| Bore Type | Taper-Lock and QD Bushed |
| Length Through Bore | 1 in |
| Belt Width | 1.5 in |
| Finished Bore | N/A |
| Hub Dia. | N/A |
| Type | KF-1 |
| Bore Range [Max] | 1.625 in |
| Pitch Diameter | 3.501 in |
| Belt Size | H |
| Bushing Type | Taperlock |
| Bore Range [Min] | 0.5 in |
| Bushing Series | 1610 |
| Hub Projection | 0.11 in |
| Outside Dia. | 3.45 in |
| Weight | 2.49 LB |
| EAN or UPC | 782475576081 |
