Find a Service Center
Alternate Products
- 8 mm Belt Pitch
- 20 mm Belt Width, 90 Teeth
- 8.969" Outside Diameter
- SDS Bushing Required
- w/a Bore Range of 1/2" to 2"
applications
- Agitators
- Mixers
- Brick and clay machinery
- Compressors
- Conveyors
- Blowers
- Laundry machinery
- Machine tools
- Paper machinery
features
- Quiet operation
- Compact
- Positive drive, no slip
- No lubrication required
- Nonstretch
- Corrosion-resistant
- Abrasion-resistant
- Virtually no backlash
- Clean operation
- Low maintenance
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Finished Bore | N/A |
| No. of Teeth | 90 |
| Bushing Type | QD |
| Type | C1 |
| Sprocket Width | N/A |
| Bore Range [Min] | 0.5 in |
| Belt Pitch | 8 mm |
| Outside Dia. | 8.969 in |
| Bore Range [Max] | 2 in |
| Belt Width | 20 mm |
| Pitch Diameter | 9.023 in |
| Bore Type | Taper-Lock and QD Bushed |
| Bushing Series | SDS |
| Weight | 11.98 LB |
| EAN or UPC | 782475265053 |
