Find a Service Center
- 4 7/16" Shaft
- 4 3/4" Base to Center
- Springlok™ Collar
- 13" to 14" Bolt Spacing
- Heavy-Duty
features
- Springlok™ 65° setscrew mounting
- Factory lubed, sealed and adjusted
- Elongated bolt holes
- Triple lip Nitrile rubber seal
- Larger rollers
- Case-carburized inner rings resist cracking
- ABB Ability Smart Sensor ready
| Shaft Dia. | 4 7/16 in |
| Base Height | 2 3/4 in |
| Collar O.D. | 6 29/64 in |
| Static Load Rating [Max] | 132,000.00 lbf |
| Bearing Design | Non-Expansion |
| Housing Material | Cast Iron |
| Center of Bearing to Front of Inner Ring | 3 29/64 in |
| Base Width | 4 3/4 in |
| Base Length | 16 1/2 in |
| Bolt Hole Spacing - Width | 2 1/2 in |
| Bolt Hole Spacing Range [Min] | 13 in |
| Mounted Unit Duty | Heavy-Duty |
| End Type | Open End |
| Bearing Type | Spherical Roller Bearing |
| Bolt Hole Length | 1 3/8 in |
| Inch/Metric | Inch |
| Bolt Hole Spacing Range [Max] | 14 in |
| Insert Type | Steel Insert |
| Bolt Size | 3/4 in |
| Seal Type | TRIDENT™ Triple Lip Rubbing Seals |
| Length Through Bore | 6 17/32 in |
| RPM [Max] | 990 rpm |
| Bolt Holes | 4 |
| Bearing Insert | 22222 |
| Center of Bearing to Back of Inner Ring | 3 5/64 in |
| Pillow Block Type | Thru-Bolt |
| Housing Construction | 1 Piece |
| Total Float | 3/8 in |
| Locking Device | Springlok™ Collar |
| Housing Height | 9 5/8 in |
| Lubrication | Relubricatable |
| Series | S-2000 |
| Bolt Hole Size | 1 3/8 in |
| Dynamic Load Rating | 104,000.00 lbf |
| Misalignment Range | ±1° |
| Bolt Hole Spacing | 13 1/2 in |
| Weight | 77.0 LB |
| EAN or UPC | 782475306022 |
