Mechanically retained triple-lip seal with stainless steel flinger
Inner and outer rings are precision hardened and honed for wear resistance and quiet operation
Patented Maxlife cage is made from a high temperature polymer material, and its one-of-a-kind, compartmentalized design ensures that grease pockets are maintained around the balls, leading to less likelihood for grease washout and cooler operating temperatures
Anti-rotation pin makes insert replacement easier with no need to replace grease fittings or location pins
65° set screw spacing offers an optimum balance between locking force and inner ring stress
Open and closed safety covers available
compliances
Conforms to FDA/USDA specifications
Static Load Rating [Max]
2,250.00 lbf
Locking Device
Setscrew Locking Collar
Inch/Metric
Inch
Lubrication
Relubricatable
Base Width
1 25/32 in
Length Through Bore
1 25/64 in
Housing Construction
1 Piece
Base Height
45/64 in
Bolt Size
1/2 in
Bolt Hole Length
23/32 in
Insert Type
Corrosion-Resistant Insert
Mounted Unit Duty
Corrosion Resistant-Duty
Bearing Type
Ball Bearing
Base Length
6 5/16 in
Seal Type
PROGUARD™ Plus Contact Seals w/Flingers
Series
P2BSCEZ
Bolt Holes
2
Bolt Hole Spacing
4 3/4 in
Temperature Range [Max]
225 °F
Bolt Hole Spacing Range [Max]
4 57/64 in
Bolt Hole Spacing Range [Min]
4 39/64 in
Shaft Dia.
1 1/4 in
Outer Ring Size
206
Dynamic Load Rating
4,368.00 lbf
Misalignment Range
±2°
Pillow Block Type
Thru-Bolt
Collar O.D.
1 37/64 in
Housing Height
3 11/32 in
End Type
Open End
Housing Material
Polymer
Bearing Design
Non-Expansion
Center Line to Base Dimension [Min]
1 11/16 in
Weight
1.25 LB
EAN or UPC
782475985203
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
