Find a Service Center
- 60 mm Shaft
- 69.9 mm Base to Center
- 174.6 mm - 201.6 mm Bolt Spacing
- Contact Seals w/Flingers
- Cast Iron Housing
| Pillow Block Type | Thru-Bolt |
| Length Through Bore | 53.6 mm |
| Housing No. | P2B-GT-12 |
| Bearing Design | Non-Expansion |
| Housing Height | 136.5 mm |
| Adapter Assembly | AN-GT-12-60M |
| Base Height | 22.2 mm |
| Mounted Unit Duty | Normal-Duty |
| Locking Device | GRIP TIGHT™ Adapter |
| Housing Construction | 1 Piece |
| Inch/Metric | Metric |
| Bolt Hole Length | 31 mm |
| Bolt Size | M16 |
| Center of Bearing to Front of Inner Ring | 34.1 mm |
| Outer Ring Size | 212 |
| Bolt Hole Spacing Range [Min] | 174.6000 mm |
| Collar O.D. | 88.9 mm |
| Housing Material | Cast Iron |
| End Type | Open End |
| Bolt Holes | 2 |
| Bearing Type | Ball Bearing |
| Lubrication | Relubricatable |
| Base Width | 60.3 mm |
| Shaft Dia. | 60 mm |
| Bolt Hole Spacing | 188.1 mm |
| Seal Type | Contact Seals w/Flingers |
| Bolt Hole Spacing Range [Max] | 201.6000 mm |
| Base Length | 241.3 mm |
| Series | Grip Tight™ |
| Weight | 9.79 LB |
| EAN or UPC | 782475879427 |
