Find a Service Center
- 35 mm Shaft
- 47.6 mm Base to Center
- 119.1 mm - 138.1 mm Bolt Spacing
- Contact Seals w/Flingers
- Cast Iron Housing
| Adapter Assembly | AN-GT-07-35M |
| Base Length | 165.1 mm |
| Housing Material | Cast Iron |
| Pillow Block Type | Thru-Bolt |
| Lubrication | Relubricatable |
| Mounted Unit Duty | Normal-Duty |
| Base Width | 44.1 mm |
| Length Through Bore | 41.3 mm |
| Bearing Design | Non-Expansion |
| Locking Device | GRIP TIGHT™ Adapter |
| Bolt Hole Spacing | 128.6 mm |
| Housing No. | P2B-GT-07 |
| Bolt Hole Length | 23.8 mm |
| Housing Height | 95.3 mm |
| Shaft Dia. | 35 mm |
| Seal Type | Contact Seals w/Flingers |
| End Type | Open End |
| Outer Ring Size | 207 |
| Bolt Hole Spacing Range [Max] | 138.1000 mm |
| Collar O.D. | 58.3 mm |
| Bolt Size | M12 |
| Bearing Type | Ball Bearing |
| Housing Construction | 1 Piece |
| Base Height | 17.9 mm |
| Inch/Metric | Metric |
| Bolt Hole Spacing Range [Min] | 119.1000 mm |
| Series | Grip Tight™ |
| Center of Bearing to Front of Inner Ring | 27 mm |
| Bolt Holes | 2 |
| Weight | 3.38 LB |
| EAN or UPC | 782475878796 |
