Find a Service Center
- 1/5" Pitch
- XL Belt Size
- 3/8" or 1/4" Belt Width
- 48 Teeth
- 3.056" Pitch Diameter
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Nonslip
- No lubrication required
- Minimum backlash
- Constant speed
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Type | D-2 |
| Length Through Bore | 1 in |
| Hub Dia. | 1 1/2 in |
| Belt Size | XL |
| Belt Width | 0.375 in, 0.25 in |
| Pitch Diameter | 3.056 in |
| Finished Bore | N/A |
| Hub Projection | 0.44 in |
| No. of Teeth | 48 |
| Outside Dia. | 3.036 in |
| Bushing Series | N/A |
| Belt Pitch | 0.2 in |
| Bore Type | Reborable |
| Bushing Type | None |
| Bore Range [Min] | 0.3125 in |
| Bore Range [Max] | 1.1875 in |
| Weight | 1.19 LB |
| EAN or UPC | 782475087884 |
