Find a Service Center
- 3/8" Pitch
- L Belt Size
- 1/2" Belt Width
- 20 Teeth
- 2.387" Pitch Diameter
applications
- Agitators and mixers
- Compressors
- Conveyors
- Fans and blowers
- Paper machinery
- Pumps
features
- Nonslip
- No lubrication required
- Constant speed
- Minimum backlash
caution
- It is necessary to use a minimum of one flanged pulley to prevent the belt from riding off
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Belt Size | L |
| Finished Bore | N/A |
| Length Through Bore | 1.25 in |
| Bore Range [Min] | 0.5 in |
| Belt Width | 0.5 in |
| Belt Pitch | 0.375 in |
| No. of Teeth | 20 |
| Bushing Type | None |
| Outside Dia. | 2.357 in |
| Bushing Series | N/A |
| Hub Dia. | 1.69 in |
| Pitch Diameter | 2.387 in |
| Bore Type | Reborable |
| Type | DF-1 |
| Bore Range [Max] | 0.875 in |
| Hub Projection | 1/2 in |
| Weight | 1.06 LB |
| EAN or UPC | 782475421640 |
