Find a Service Center
Alternate Products
- 01 Series Pillow Block
- 65 mm Shaft
- 3 5/32" Centerline to Base
- 11" Base Length
- 9 3/16" Bolt Centers
description
- All grooved outer races must be clamped axially
applications
- Conveyors
- Mechanical handling
- Electrical machinery
- Fans
- Haulage
- Winders
- Headgear
- Marine
- Paper manufacturing
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Base Width | 2 3/4 in |
| Shaft Dia. | 65 mm |
| Temperature Range [Max] | 212 °F |
| Insert Type | Split Steel Insert |
| Lubrication | Relubricatable |
| Seal Type | Triple Labyrinth Seals |
| Dynamic Load Rating | 21800 lbf |
| Bolt Holes | 2 |
| Pillow Block Type | Thru-Bolt |
| Bolt Hole Spacing Range [Max] | 9 1/2 in |
| Mounted Unit Duty | Heavy-Duty |
| Temperature Range [Min] | 32 °F |
| Housing Material | Cast Iron |
| Bolt Hole Spacing | 9 3/16 in |
| Series | 01 Series |
| RPM [Max] | 3940 rpm |
| Pedestal | P 03 |
| End Type | Open End |
| Locking Device | Clamping Ring Collar |
| Base Height | 1 1/4 in |
| Bolt Size | 5/8 in |
| Inch/Metric | Metric |
| Static Load Rating [Max] | 24800 lbf |
| Bearing Type | Split Cylindrical |
| Housing Construction | 2 Piece |
| Bearing Design | Non-Expansion |
| Axial Load | 1200 lbf |
| Housing Height | 7 in |
| Base Length | 11 in |
| Weight | 22.677 LB |
| EAN or UPC | 7316579385411 |
