Find a Service Center
Alternate Products
- 01 Series Pillow Block
- 2 3/4" Shaft
- 3 3/4" Centerline to Base
- 13" Base Length
- 10 5/8" Bolt Centers
description
- All grooved outer races must be clamped axially
applications
- Haulage
- Winders
- Headgear
- Marine
- Fans
- Conveyors
- Mechanical handling
- Electrical machinery
- Paper manufacturing
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Locking Device | Clamping Ring Collar |
| Lubrication | Relubricatable |
| Housing Material | Cast Iron |
| Bolt Holes | 2 |
| Seal Type | Triple Labyrinth Seals |
| Base Length | 13 in |
| Insert Type | Split Steel Insert |
| Dynamic Load Rating | 29200 lbf |
| Temperature Range [Max] | 212 °F |
| Housing Construction | 2 Piece |
| Shaft Dia. | 2.75 in |
| Base Height | 1 1/2 in |
| Bolt Hole Spacing | 10 5/8 in |
| End Type | Open End |
| Axial Load | 1710 lbf |
| Base Width | 3 in |
| RPM [Max] | 3310 rpm |
| Pillow Block Type | Thru-Bolt |
| Bolt Size | 3/4 in |
| Pedestal | P 04 |
| Bolt Hole Spacing Range [Min] | 10 1/4 in |
| Bolt Hole Spacing Range [Max] | 11 in |
| Mounted Unit Duty | Heavy-Duty |
| Bearing Type | Split Cylindrical |
| Series | 01 Series |
| Bearing Design | Expansion |
| Static Load Rating [Max] | 35300 lbf |
| Temperature Range [Min] | 32 °F |
| Housing Height | 8 1/8 in |
| Inch/Metric | Inch |
| Weight | 33.616 LB |
| EAN or UPC | 7316579385640 |
