Skip to content Skip to navigation menu
Char-Lynn 2000 Series Low Speed, High Torque (LSHT) Geroler® Disc Motor

104-1445-006

Char-Lynn 2000 Series Low Speed, High Torque (LSHT) Geroler® Disc Motor
Item #100154480
  • Disc Motor
  • Geroler
  • Disc Valve
  • 7/8-14 UNF SAE O-Ring Port
  • 24.03 Cubic Inch Displacement Per Rev
  • Straight Shaft
+ Show More + Show Less
Char-Lynn 2000 Series Low Speed, High Torque (LSHT) Geroler® Disc Motor
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • Disc Motor
  • Geroler
  • Disc Valve
  • 7/8-14 UNF SAE O-Ring Port
  • 24.03 Cubic Inch Displacement Per Rev

applications

  • Swing motor, Brush Cutters & mowers, Harvesting equipment

features

  • Highly efficient Geroler® element provides energy savings
  • Widest range of available options on the market promotes maximum flexibility to fit into many applications
  • Disc valve design delivers the lowest pressure drop in the industry
  • Additional configurations available
  • please contact your local Applied® service center for more information

options

  • Eight shaft configurations
  • Port reliefs
  • Speed sensors
  • Oversized ports
  • Two speed
  • Manifold
Special Features Hardware Code 00
Pilot Diameter 3.25 in
Accessories Code 00
Output Shaft Code 02
Case Drain 0.4375-20 UNF-2B SAE O-Ring Port
Bolt Circle Dia. 4.19 in
Mounting Type Code AJ
Pressure [Max] 2250 psi
Port Code AA
Seal Material Buna-N
Flange Orientation Standard
Rotation Standard Rotation
Corrosion Resistant No
Port Type SAE O-Ring
Mounting Hole Size 0.535 in
Port Size & Location SAE-10 Side
Geroter/Geroler Options Standard
Flow Rate 20 gal/min
Mount Type 4 Bolt, Magneto
Series 2000 Series
Shaft Size & Type 1 1/4 in x 5/16 in Straight
Displacement (in³/rev) 24.03
Paint/Packaging Individual Box
Motor Element Geroler
Mounting Holes 0.535 in
Port Size SAE-10, 7/8-14 UNF
Material Cast Iron
Paint Code 0
Maximum Speed @ Continuous Flow 191 rpm @ 20 gal/min
Motor Type Disc Valve
Flow [Max] 20 gal/min
Special Features Assembly Code 0
Port Location Side Port, Staggered
Output Torque at Rated PSI (inch/pounds) 6860 in lb
Case Drain Code 01
Duty Standard-Duty
RPM [Max] 191 rpm
Shaft Type Straight
Splines 0
Inlet Pressure [Max] 4500 psi
Weight 42.0 LB
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison