Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 7/8-14 UNF SAE O-Ring Port
- 18.2 Cubic Inch Displacement Per Rev
applications
- Agricultural augers, Food processing, Machine tools, Harvesters, Seeders
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
| Paint Code | A |
| Special Features Assembly Code | 0 |
| Material | Cast Iron |
| Special Features Hardware Code | DS |
| Port Location | Side Port |
| Port Code | A |
| Seal Material | High Pressure |
| Flange Orientation | Standard |
| Port Size | SAE-10, 7/8-14 UNF |
| Port Size & Location | SAE-10 Side |
| Rotation | Standard Rotation |
| Inlet Pressure [Max] | 2500 psi |
| Special Features | None |
| Mounting Holes | 0.535 in |
| Pilot Diameter | 3.25 in |
| Mounting Type Code | REF! |
| Port Type | SAE O-Ring |
| Maximum Speed @ Continuous Flow | 190 rpm @ 15 gal/min |
| Motor Type | Spool Valve |
| RPM [Max] | 190 rpm |
| Duty | Standard-Duty |
| Shaft Size & Type | 1 in - 6T Spline |
| Flow Rate | 15 gal/min |
| Output Shaft Code | 02 |
| Shaft Type | Splined |
| Corrosion Resistant | No |
| Case Drain Code | 1 |
| Mount Type | 2 Bolt |
| Flow [Max] | 15 gal/min |
| Output Torque at Rated PSI (inch/pounds) | 4345 in lb |
| Series | S Series |
| Splines | 6 |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Mounting Hole Size | 0.535 in |
| Motor Element | Gerotor |
| Pressure [Max] | 1500 psi |
| Bolt Circle Dia. | 4.19 in |
| Displacement (in³/rev) | 18.2 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Weight | 29.0 LB |
