Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- 1/2-14 NPTF Port
- 10.07 Cubic Inch Displacement Per Rev
description
- Geroler motors are similar in design to the geroter motor, but feature better low-speed performance characteristics and higher overall efficiency.They can generate up to 15 hp.Motors with the Geroler element provide high starting and running torque as well.By minimizing friction, the Geroler element helps to increase efficiency while providing smooth output shaft rotation even at very low speeds.
applications
- Agricultural augers, Harvesters, Seeders, Railroad maintenance equipment
features
- Speed up to 1,150 rpm
- Compact size
- Provides high efficiency, even at start-up and low speeds
- Motor shaft rotation can instantly be reversed by changing direction of input/output flow while generating equal torque in either direction
options
- SAE ports
- Splined and tapered shafts
| Special Features | None |
| Flow [Max] | 15 gal/min |
| Mounting Holes | 0.535 in |
| Port Size & Location | 1/2 in NPTF Side |
| Shaft Type | Straight w/ Woodruff Key |
| Paint Code | A |
| Maximum Speed @ Continuous Flow | 343 rpm @ 15 gal/min |
| Motor Type | Spool Valve |
| Flange Orientation | Standard |
| Motor Element | Gerotor |
| Pilot Diameter | 3.25 in |
| Mounting Hole Size | 0.535 in |
| Port Code | B |
| Displacement (in³/rev) | 10.07 |
| Rotation | Standard Rotation |
| Output Shaft Code | 01 |
| Case Drain Code | 1 |
| Port Type | NPTF |
| Special Features Assembly Code | 0 |
| Series | S Series |
| Pressure [Max] | 1900 psi |
| Output Torque at Rated PSI (inch/pounds) | 2662 in lb |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Seal Material | Buna-N |
| Mounting Type Code | REF! |
| Case Drain | 0.4375-20 UNF-2B SAE O-Ring Port (End Cap) |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Mount Type | 2 Bolt |
| Port Size | 1/2, 1/2-14 |
| Port Location | Side Port |
| Corrosion Resistant | No |
| Flow Rate | 15 gal/min |
| Inlet Pressure [Max] | 2500 psi |
| Splines | 0 |
| Duty | Standard-Duty |
| Material | Cast Iron |
| Special Features Hardware Code | 00 |
| RPM [Max] | 343 rpm |
| Bolt Circle Dia. | 4.19 in |
| Weight | 29.0 LB |
