Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 2.2 Cubic Inch Displacement Per Rev
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
| Series | H Series |
| Mounting Hole Size | 3/8 in |
| Case Drain Code | 0 |
| Shaft Type | Straight w/ Woodruff Key |
| Shaft Options Code | 0 |
| Special Features | None |
| Port Type | NPTF |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Geroter/Geroler Options | Free Running |
| Port Code | AB |
| Port Size | 1/2 |
| Manifold Options Code | 0 |
| Pilot Diameter | 1.75 in |
| Displacement (in³/rev) | 2.2 |
| Mounting Holes | 3/8-16 |
| Flow [Max] | 10 gal/min |
| Bolt Circle Dia. | 3 1/4 in |
| Special Features Hardware Code | 00 |
| Motor Element | Gerotor |
| Flange Orientation | Standard |
| RPM [Max] | 1021 rpm |
| Pressure [Max] | 1800 psi |
| Motor Type | Spool Valve |
| Inlet Pressure [Max] | 2500 psi |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Flow Rate | 38 lpm |
| RPM [Min] | 1021 rpm |
| Geroter/Geroler Options Code | A |
| Seal Material | Buna-N |
| Output Shaft Code | 01 |
| Mounting Type Code | BA |
| Output Torque at Rated PSI (inch/pounds) | 497 in lb |
| Case Drain | None |
| Special Features Assembly Code | 0 |
| Mount Type | 4 Bolt |
| Splines | 0 |
| Speed Sensor Options Code | 0 |
| Seal Options Code | 00 |
| Port Size & Location | 1/2 in NPTF Side |
| Port Location | Side Port |
| Material | Cast Iron |
| Paint Code | Y |
| Weight | 11.2 LB |
