Find a Service Center
- Spool Motor
- Gerotor
- Spool Valve
- Port
- 2.2 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
| Pilot Diameter | 3.25 in |
| Port Size & Location | 1/2 in NPTF Side |
| Port Type | NPTF |
| Flow Rate | 38 lpm |
| Case Drain | None |
| Bolt Circle Dia. | 4.187 in |
| Rotation | Standard Rotation |
| RPM [Min] | 1021 rpm |
| Case Drain Code | 0 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Port Location | Side Port |
| Mounting Holes | 0.535 in |
| Flow [Max] | 10 gal/min |
| Port Size | 1/2 |
| Seal Material | Buna-N |
| Pressure [Max] | 1800 psi |
| Duty | Standard-Duty |
| Splines | 0 |
| Motor Type | Spool Valve |
| RPM [Max] | 1021 rpm |
| Output Shaft Code | 07 |
| Motor Element | Gerotor |
| Paint Code | A |
| Special Features | Free Running Gerotor |
| Shaft Type | Straight w/ Cross Hole |
| Port Code | B |
| Mount Type | 2 Bolt |
| Material | Cast Iron |
| Output Torque at Rated PSI (inch/pounds) | 497 in lb |
| Displacement (in³/rev) | 2.2 |
| Mounting Hole Size | 0.565 in |
| Series | H Series |
| Special Features Hardware Code | AA |
| Mounting Type Code | A |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Corrosion Resistant | No |
| Shaft Size & Type | Straight |
| Inlet Pressure [Max] | 2500 psi |
| Special Features Assembly Code | 0 |
| Flange Orientation | Standard |
| Weight | 11.2 LB |
