
- Spool Motor
- Gerotor
- Spool Valve
- 1/2 BSPP Port
- 7.3 Cubic Inch Displacement Per Rev
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Integrated proven orbit motor principle results in a compact yet powerful package
- Hydrodynamic journal bearings extend bearing life
- Three-zone pressure design allows for an increased shaft seal and bearing life
options
- SAE ports
- Splined and tapered shafts
Corrosion Resistant | No |
Port Code | E |
RPM [Max] | 469 rpm |
Flow Rate | 15 gal/min |
Case Drain Code | 2 |
Case Drain | G 1/4 (BSP) |
Motor Element | Gerotor |
Mounting Holes | 0.535 in |
Pressure [Max] | 1800 psi |
Splines | 0 |
Paint Code | A |
Flange Orientation | Standard |
Flow [Max] | 15 gal/min |
Seal Material | Buna-N |
Rotation | Standard Rotation |
Duty | Standard-Duty |
Shaft Type | Straight |
Pilot Diameter | 3.25 in |
Maximum Speed @ Continuous Flow | 469 rpm @ 15 gal/min |
Output Torque at Rated PSI (inch/pounds) | 1699 in lb |
Mounting Type Code | A |
Special Features Hardware Code | 00 |
Shaft Size & Type | Straight |
Output Shaft Code | 24 |
Mounting Hole Size | 0.535 in |
Series | H Series |
Port Type | BSPP |
Special Features Assembly Code | 0 |
Mount Type | 2 Bolt |
Inlet Pressure [Max] | 2500 psi |
Port Size | 1/2 |
Motor Type | Spool Valve |
Paint/Packaging | Low Gloss Black, Individual Box |
Special Features | None |
Displacement (in³/rev) | 7.3 |
Bolt Circle Dia. | 4.19 in |
Port Location | Side Port |
Weight | 13.0 LB |
