Skip to content Skip to navigation menu
Char-Lynn H Series Low Speed, High Torque (LSHT) Gerotor Spool Motor

101-1326-009

Char-Lynn H Series Low Speed, High Torque (LSHT) Gerotor Spool Motor
Item #100152357
  • Spool Motor
  • Gerotor
  • Spool Valve
  • 7/8-14 UNF SAE O-Ring Port
  • 9.7 Cubic Inch Displacement Per Rev
  • Straight Shaft
+ Show More + Show Less
Char-Lynn H Series Low Speed, High Torque (LSHT) Gerotor Spool Motor
Price Unavailable
Price Unavailable
Pricing is unavailable at this time. Please contact Customer Service for assistance.
Online Ordering Restricted
Please contact Customer Service for assistance.
Contact Customer Service
    Shipment Options
  • Spool Motor
  • Gerotor
  • Spool Valve
  • 7/8-14 UNF SAE O-Ring Port
  • 9.7 Cubic Inch Displacement Per Rev

description

  • Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.

applications

  • Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers

features

  • Integrated proven orbit motor principle results in a compact yet powerful package
  • Hydrodynamic journal bearings extend bearing life
  • Three-zone pressure design allows for an increased shaft seal and bearing life
  • Additional configurations available
  • please contact your local Applied® service center for more information

options

  • Five mounting styles
  • Low-speed spool
  • Nine shaft options
  • Speed sensors
Port Location Side Port
Displacement (in³/rev) 9.7
Flange Orientation Standard
Mounting Type Code A
Output Torque at Rated PSI (inch/pounds) 2062.22 in lb
Bolt Circle Dia. 4.19 in
RPM [Min] 353 rpm
Output Shaft Code 08
Port Size SAE-10, 7/8-14 UNF
Maximum Speed @ Continuous Flow 353 rpm @ 15 gal/min
Mount Type 2 Bolt, SAE-A
Splines 0
Pressure [Max] 1650 psi
Rotation Standard Rotation
Flow [Max] 15 gal/min
Mounting Hole Size 0.535 in
Duty Standard-Duty
Paint/Packaging Low Gloss Black, Individual Box
Material Cast Iron
Case Drain Code 0
Case Drain None
Flow Rate 15 gal/min
Seal Material Buna-N
RPM [Max] 353 rpm
Pilot Diameter 3.25 in
Port Type SAE O-Ring
Paint Code A
Series H Series
Motor Element Gerotor
Corrosion Resistant No
Inlet Pressure [Max] 2500 psi
Shaft Size & Type 1 in Straight, w/ Cross Hole
Special Features Assembly Code 0
Special Features Hardware Code 00
Shaft Type Straight w/ Cross Hole
Port Size & Location SAE-10 Side
Mounting Holes 0.535 in
Motor Type Spool Valve
Port Code A
Weight 12.5 LB
We're here for you
with Service Centers across the country -
We have your back
Close Compare List Open Compare List Toggle

Product Comparison